Digital Torque Wrenches
Tightening in production with different tightening. Strategies in torgue and angle. Quality control tests by measuring the residual torque on the joints already tightened, with different detection methods. Data traceability with embedded barcode reader and wireless tranfer to software/ external databases.
- Production tighenings
- Quality control
- Residual torque measurement on already tightened joints
- Cp-Cpk statics and reports
- Data traceability
- Wireless transfer of result and traces to external databases
Test Benches
Test of all power tools and wrenches on the production line (Cm-Cmk and statistical control), with test functions (manual or automatic) and calibration, according to ISO 6789 and ISO 5393. Measurement of torque and angle produced by power tools. Result and traces are saved and transferred to remote databases. The bench FTY reproduces the real joint behavior, testing the tool in the same real condition of use.
- Test of all power tools and wrenches
- Test (manual or automatic) and calibration according to ISO 6789 e ISO 5398 standards
- Cm-Cmk statistics and reports
- Torque and angle measurement of tools
- Transfer results and traces to external database
Torque Analyzers
Portable analyzers that, connected to a torque or torque/angle transducer, perform tightenings, test all type of power tools (Cm-Cmk) and measure the residual torque on joints already tightended (Cp-Cpk). Possibility fo embedded barcode reader and wireless communications
- Test of all power tools and wrenches
- Test and calibration according to ISO 6789 e ISO 5398 standards
- Torque and angle measurement of tools
- Cm-Cmk, Cp-Cpk statistics and reports
- Transfer results and traces to external database
Digital Torque Wrenches
Tightening in production with different tightening. Strategies in torgue and angle. Quality control tests by measuring the residual torque on the joints already tightened, with different detection methods. Data traceability with embedded barcode reader and wireless tranfer to software/ external databases.
- Production tighenings
- Quality control
- Residual torque measurement on already tightened joints
- Cp-Cpk statics and reports
- Data traceability
- Wireless transfer of result and traces to external databases
Test Benches
Test of all power tools and wrenches on the production line (Cm-Cmk and statistical control), with test functions (manual or automatic) and calibration, according to ISO 6789 and ISO 5393. Measurement of torque and angle produced by power tools. Result and traces are saved and transferred to remote databases. The bench FTY reproduces the real joint behavior, testing the tool in the same real condition of use.
- Test of all power tools and wrenches
- Test (manual or automatic) and calibration according to ISO 6789 e ISO 5398 standards
- Cm-Cmk statistics and reports
- Torque and angle measurement of tools
- Transfer results and traces to external database
Torque Analyzers
Portable analyzers that, connected to a torque or torque/angle transducer, perform tightenings, test all type of power tools (Cm-Cmk) and measure the residual torque on joints already tightended (Cp-Cpk). Possibility fo embedded barcode reader and wireless communications
- Test of all power tools and wrenches
- Test and calibration according to ISO 6789 e ISO 5398 standards
- Torque and angle measurement of tools
- Cm-Cmk, Cp-Cpk statistics and reports
- Transfer results and traces to external database
Transducer and joint Simulators
Transducer used directly on the production line to measure/ calibrate power tools and torque wrenches. They can be connected to data acquisition systems or test benches
- Used directly on the production line to measure/ calibrate power tools
- To be connected to torque analyzers or test benches
Accessories
Inserts and ratchets for torque wrenches, with and without automatic recognition chip, and torque multipliers
Software
Definition of tools archive, schedule of tests and generation of statistics Cm-Cmk, Cp-Cpk, control cards (SPC). Management of procedures for rework and production stations.
- Tools and joints archive
- Test scheduling
- Cm-Cmk, Cp-Cpk statistics and reports
- Control Charts (SPC)
- Error proof visual procedure for rework stations.
- Laboratory instruments programming
- Process control
Mobile Calibration
Mobile Laboratory for calibration of torque and angle transducer and electrical calibration of amplifers
SCS Concept provides a mobile laboratory for calibration of torque and angle transducers, electrical calibration of amplifers.
CONNEXALL CO., LTD
บริษัท คอนเนคซอล จำกัด มีความรู้ความเข้าใจในสินค้ามาอย่างยาวนาน ทำให้เข้าใจในทุกความต้องการของลูกค้า
จึงคัดสรรสินค้าด้าน Assembly Tools ที่มีคุณภาพสูง และมีชื่อเสียงและนิยมใช้กันอย่างแพร่หลายทั่วโลก
ประโยชน์ที่ทางลูกค้าจะได้รับ
ช่วยให้ประกอบได้ เร็วขึ้น และมีความแม่นยำ
ได้รับสินค้าที่มีคุณภาพ
ลดค่าใช้จ่ายพลังงานและต้นทุน
ลดการสูญเสียเวลาในการผลิต
ได้รับบริการ การซ่อมบำรุงในระยะยาว
ดูแลอย่างต่อเนื่องด้วยบริการหลังการขาย
